Tc-helicon VoiceTone Create XT Manual User Manual download pdf (Page 28)

FAQ & Troubleshooting:

1. I'm not getting any sound from Create XT

a. Confirm the PA is on and the mixer channel is

turned up.

b. Check each cable by connecting your mic directly to

the sound system and testing.

c. Check that the 48V light is lit if you are using a

phantom powered condenser mic.

2. I'm only hearing my dry voice

a. Confirm that the On footswitch light is on.

b. Set Mix knob to center detent position.

c. Check that Create XT’s Left/Main output is

connected to your PA if running in mono.

d. Check that at least one effect on/off is active.

3. My sound is distorted.

a. Check if the current patch is a Transducer patch that

has distortion enabled.

b. If the input light is turning red frequently, reduce

input level.

4. I’m getting feedback

a. Move the PA speaker or monitor so it is in a line

with your mic and facing you.

b. Reduce volume of the PA

c. Use Tone setting alternate #1 with less high boost

or turn Tone off altogether.

5. I can’t turn effects off or on

a. Press and hold the On footswitch to exit Tap Tempo

mode.

6. Some blocks aren’t working

a. There are presets that require multiple blocks

engaged in order to complete the effects path.Turn

on additional blocks to get sound.

FAQ and Troubleshooting

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Tc-helicon VoiceTone Create XT Manual User Manual Page 28