Tc-helicon VoiceTone T1 Manual User Manual download pdf (Page 7)

First Setup and Use

1.TurndownyourPA’smastervolumeandsetthedesiredinputchannelEQtoflat(EQ=off).

2.ConnectyourmicandPAasshowninthediagramfirst,thenplugintheACadaptor.Forlive

performance,aUSBconnectiontoacomputerisnotrequired.

3.SettheShapeandComp/De-esscontrolstothecenternotch.TurnWarmthoffifisisn’talready.

4.SingintoyourmicwhileadjustingtheMICGAINcontrolsothattheinputlevelLEDflashesgreen.

Brief flashes of red on the LED on your loudest singing are ok.

5. Ensure that the effect is on (center LED is lit).

6.SingwhileturningupyourPAvolumetoacomfortablelevel.

VoiceToneT1willtakeamomenttoadjusttothetoneofyourvoice.Itconstantlyadjustsasyousing.

You will notice your voice is pleasantly brighter and smoother.

Phantom Power

ThereisnoswitchtoenablephantompowerontheVoiceTonesingles.Phantompowerisavailable

when the product is powered. Microphones that don’t require phantom power will operate properly.

AlwaysapplypowerasthelastconnectionstepandensureyourPAismuted.Thiswillreducethe

chance of audio crackles that could harm your equipment.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Tc-helicon VoiceTone T1 Manual User Manual Page 7