Tc-helicon VoiceLive Manual User Manual download pdf (Page 10)

REAR PANEL

Balanced Inputs (1/4” TRS)

Line - You have the option of selecting this or

the mic input as the main Vocal input.

Instrument - This input is designed to accept

output from the following sources:

• Mixer

• Guitar pedal or preamp

• Active pickups (guitar with batteries)

• Acoustic guitar with preamp

• Keyboard output

Plugging an electric or acoustic guitar with

passive pickups directly into this input will

not result in optimal audio quality. (See

note on page 16.)

Balanced Outputs (1/4” TRS)

Left/Right - This is the stereo output of

VoiceLive. If mono operation is desired

use either of the outputs and set the

UTPUT parameter to Mono (edit screen

IO9). These outputs may be connected

directly to balanced mic inputs with proper

1/4”TRS to XLR out adapters as long as

there is no phantom power on the input. It

is also necessary to set the O

UTPUT RANGE

to a lower setting (edit screen IO9) when

driving mic inputs. When there is phantom

power, direct boxes are necessary to

connect to mic inputs.

Digital I/O

S/PDIF In/Out - Sends and receives digital

audio to S/PDIF standards.

MIDI

In, Out and Thru - Standard MIDI interface

Pedal In

Accepts passive volume pedals and

expression pedals. The operation of the

UL6500

EN/IEC 60065

MIC PASS THRU

SERIAL NO.

TYPE: HFW001

MADE IN THAILAND

THRU

INLEFT RIGHT

OUT

MIDIBALANCED OUTPUTS DIGITAL I/O PEDAL

S/PDIF

100-240VAC

50-60Hz, 15W

CUS

THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE

AVIS:

RISQUE DE CHOC ELECTRIQUE-NE PAS

OUVRIR.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MIC INPUT

MIC LEVEL

MIC IN

SELECT

-20dB

LIMITER +48V

US Patent: #4,688,464 #5,231,671 #5,301,259

#5,567,901 #5,641,926 #5,986,198 #6,046,395

LINE

BALANCED INPUT

INSTRUMENT

expression pedal can be programmed per

preset on edit screen XPED and globally on

edit screen UT1.

Mic Pass Thru

This connects directly to the microphone

input and is used to connect directly to a

mixing board. If VoiceLive loses power for

any reason, the signal from the

microphone will still get through to the

mixer. When using this connector and

microphones requiring phantom power,

you have the option of using the phantom

power from VoiceLive or the mixing

console. Please note that using both the

mixing console phantom power through

this connector and VoiceLive phantom

power will result in too much power to the

microphone.

Mic Input

Mic Connector - Balanced microphone input.

MIC LEVEL Knob - This controls the input gain

of the mic input.

-20dB - This attenuates the input by 20dB to

handle high output condenser

microphones (and the occasional really

loud singers with dynamic microphones).

MIC IN SELECT Button - This selects the

microphone for the Vocal input. When not

pressed, VoiceLive defaults to the Line

input.

LIMITER Button- This enables the VOS™

optical limiter on the mic input.

+48V - This enables +48 V phantom power on

the mic input. Never plug single ended

(unbalanced) microphones or instruments

or signal processors (balanced or

unbalanced) into the mic input if +48V

phantom power is on.

Note: Optimal connection to balanced equipment is achieved using balanced cables. However, if

your equipment is NOT balanced you will generally have no problems.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 58 59

Comments to this Manuals

No comments

Tc-helicon VoiceLive Manual User Manual Page 10

Comments to this Manuals

Related products and manuals for Audio Tc-helicon VoiceLive Manual