Tc-helicon VoiceLive Manual User Manual download pdf (Page 12)

10

QUICKSTART

Getting Sound From VoiceLive

What you Need:

• VoiceLive

• Power cable

• microphone

• microphone cable

• two 1/4" cables

• PA or powered speakers

1. Connect the power cable to VoiceLive and

to your mains power. VoiceLive does not

have a power switch so just plugging it in

will turn it on.

2. Connect the two 1/4" cables to the Left and

Right output of VoiceLive into two inputs on

your PA or powered speakers.

3. With the MIC LEVEL knob and the OUT-

PUT knob at minimum (fully counter-clock-

wise) connect one end of your microphone

cable to your microphone. Plug the other

end into the MIC input of VoiceLive.

4. Engage the 'microphone' and 'limiter'

switches on the back panel (the limiter

switch will make it easier to set the levels).

If your microphone requires phantom power

engage the 'phantom power' switch on the

back panel.

5. While singing into the microphone increase

the microphone volume using the MIC IN

knob until the level meters on the display

are fluctuating above '-20dB' but never to

the 'red' with clipping. If the level from the

microphone is always too high, engage the

'-20dB Pad' switch on the back panel.

7. With your PA or speaker level at a nominal

setting sing through the microphone adjust-

ing the 'Lead', ‘Harmony', 'Effects' and

'Output' level using the edit knobs on the

front panel.

8. Push on the PREVIOUS/NEXT buttons

(5,6) or turn the DATA WHEEL to try out the

different presets.

VoiceLive Performance Features

VoiceLive is designed to be the ultimate vocal

performance product. Foot control of vocal

effects and harmonies can be achieved at vari-

ous levels. On a basic level in preset mode,

you can scroll through presets. On an

advanced level in Song mode you can arrange

preset sequences with markers within the

sequence. Along with this sophistication of pre-

set access, is the preset-assignable USER

button and EXPRESSION pedal control.

Step Through Orientation

Most of this orientation may be done with the

footswitch buttons. Plug in a microphone and

put it on a stand to free up your hands to hold

this manual. Try going through this procedure,

singing into the microphone as you go and

jamming with VoiceLive. Often during this ori-

entation we give background to how certain

things are set up. This often means referring

to “edit screens”. These edit screens can

accessed by pressing the EDIT button and

turning the DATA WHEEL.

Preset Mode

This is VoiceLive's basic performance mode.

On power-up VoiceLive is in Preset Mode.

• Press the PREVIOUS/NEXT buttons (5, 6

shown above) to change the preset number.

• Select preset Number 11 which is a Scale

type preset.

PREVIOUS

USER

HARMONY MUTE

HOLD FOR

BYPASS

NEXT

LEAD HARMONY INSTRUMENT OUTPUT

EDIT 1 EDIT 2 EDIT 3 EDIT 4

Input Clip

0 PPM dB

-5

-10

Out Clip

-20

-40

HARMONY

THICKEN

EFFECTS

PITCH CORR.

I/O

UTILITIES

MIDI IN

PROGRAM DISPLAY

HARMONY | CORRECTION | EFFECTS

VOICELIVE

VOICE 2

VOICE 4

VOICE 1

VOICE 3

LIMITMIC INGLOBAL FX EDITED

PRESET# HARMONY MODE ROOT SCALE/CHORD

Take it Over

Pr39

PRESET SONG VOICE

SONG

PRESET

Direct A / Voice 1

SELECT

SELECT

Direct B / Voice 2

STEP

KEY

REWIND

SCALE

Direct D / Voice 4

HOLD FOR MODE HOLD FOR SUBMODE

SONG

DIRECT

Direct C / Voice 3

39: Scale Bmaj2

PUSHTO ENTER

1234

5678

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 58 59

Comments to this Manuals

No comments